Quotec – 3D Shed Construction Model – Steel Building Design & Quotation Software

Quotec is Australia’s premier software solution for steel buildings, sheds, garages and carports.

Quotec Designs and Quotes Residential, Commercial, Industrial and Rural sheds, buildings, garages and awnings. Quotec’s 1-Click Certification gives you fully compliant drawings – ready to go in seconds. Print or e-mail from your PC, it’s so easy!

Quotec gives you access to top Australian suppliers. You pay a fraction of the cost.

Take the video tour: http://www.quotec.com.au/tour
Arrange a hands on demo: http://www.quotec.com.au/contact
Visit Quotec: http://www.quotec.com
Video Rating: / 5

How to build a steel shed

How to build a steel shed

Do you want to learn how to build a steel shed? Here are some steel shed building tips. In this video I’ll show you the things we learned when we built our 8‘ x 8‘ arrow steel shed. Building this still shed was fairly straightforward, as long as we make sure we read the directions carefully. There are a lot of nuts and bolts and screws, and the job will take you a lot longer than you think it will. If you allow 12 hours, and you have a person or two to help you, that should be good enough. Also want to make sure that you were putting it on a level foundation, or the parts won’t lineup properly. Also make sure you have the right tools. Having the right tools is a great way to make building a steel shed a lot easier. You want to have a drill with a screwdriver bit, and some good players and maybe a wrench or two. Those are my steel shed building tips. This is a helpful video to watch if you want to learn how to build a steel shed.
Here are the kids’ channels:

Steel truss pole barn Kit Installation – carports, garages, pole sheds

Review our certified steel truss barn plans here https://overbuiltbarns.com/plans/

Large or small
steel truss barns are all basically built the same way
This build is a 16×24′ garage kit.
The customer used this kit for boat storage.
Laying out the 6×6 post with string line. Dig the post holes. Level, set in concrete and cut posts. Setting the steel trusses. Hardware and drilling the bolt holes. roof framing. Installing the metal roof system with ridge cap and roof screws.

Steel clips welded to the top eliminates the need for hurricane clips and makes for an easy no layout roof.
Roof materials :
2x6x12 2x6x14 steel clip screws, galvalume sheet metal, Roofing screws and ridge cap.

Subscribe now

Visit http://www.overbuiltbarns.com for information on our steel truss pole barn kits
Video Rating: / 5

Insider secrets about steel and metal garden sheds

Okay, disclaimers first – we at www.fusioninsulation.com don’t hate garden sheds, steel sheds, wooden sheds, steel containers or metal frame buildings. In fact, they are fabulous creations (usually). As well as that we can only comment on what we see when we are called in to fix some of the most common problems, i.e. condensation, wind ingress, bug ingress, and wind noise and also that most of these unheated buildings are freezing cold in the winter. So you may already have a warm shed, a super insulated double skinned airtight shed and if so, we salute your genius and good luck. It’s just that a lot of our customers ask us in to fix their shiny new sheds because they thought it would be different. What we spray at www.fusioninsulation.com is hard, closed cell, waterproof, foam. This foam bonds permanently and is very similar in density and texture to the foam you will find on insulated hot water cylinders. As I mentioned, it stays in place for life and stops condensation, drafts and makes the structure much much stiffer so in high winds the steel won’t rattle or make flexing noises. We offer free quotes, and most of our customers are impressed with how economical this lifetime solution to the primary steel shed woes, can be. Thanks for watching
Video Rating: / 5

Planning and construction of steel framed shed

Planning and construction of steel framed shed

This video shows the planning and construction steps for our 9m x 8m steel framed shed / garage / workshop. The council related information is probably of more use in NZ than elsewhere, but the rest of the steps are probably pretty similar. Total construction time was around 1 day for concrete and 2.5 days for builders.
Video Rating: / 5