Shed DIY. How to Build a Shed House. How to Build a Shed. How to Build a Shed Step by Step ♦DIY CAM♦

Shed DIY. How to Build a Shed House. How to Build a Shed. How to Build a Shed Step by Step ♦DIY CAM♦

Watch the Video “How to Make a Nano Aquarium” – https://youtu.be/EgvocALYXc0
Shed DIY. How to Build a Shed House. How to Build a Shed. How to Build a Shed Step by Step. ♦DIY CAM♦

Level the ground (if necessary) and install deck piers along a grid to support the shed. The piers will allow you to string support beams beneath the floor of the shed. In the example design, the piers are spaced 6 feet (1.8 m) apart in one direction and 4 feet (1.2 m) apart in the other for a total grid area of 12 x 8 feet.

String support beams lengthwise across the deck piers. This will support your floor joists, which run in the opposite direction. The easiest way to attach the beams to the piers is with metal straps, which have built-in nail holes. In the example design, the beams are 12-foot-long 4×6”s.

Attach joists to the support beams and separate them with blocking.
First, you will need to attach a rim joist along the outer edge of each outermost support beam; each of these will need to be the same length as the beam underneath.

Nail plywood sheeting to the joists to form the floor. If necessary, use H-clips in addition to nailing the sheets into place; these fit between two pieces of plywood and lock them together for additional structural strength. In the example design, two standard sheets of 4- by 8-foot plywood are used whole and a third is sawn in half and used to fill in the 4-foot difference on either end. Because of the spacing of the piers, support beams, and joists, no additional cuts or adjustments are necessary.
Flooring may also be screwed down with 3-inch deck screws.

Build the framework for all four walls. To account for the fact that the front and back walls are different from each other (due to the doorframe in the front) and the side walls must both be sloped (to prevent rain from collecting on the roof), each of these will have to be tackled somewhat differently.
Build the framework for the back wall. Make the top and bottom beams (a.k.a. the plates) the same length as the length of the floor which they sit.
Build the framework for the front wall. The front wall should be the same as the back wall except taller and with a door frame so that you can hang a door in the shed when you’re done.

Build the framework for the side walls. The bottom plate of each side wall should be the same length as the distance between the bottom plates of the front and back wall (so that the side walls will fit between them).
Assemble the four wall structures. Wall structures are usually nailed to the underlying support from the bottom up.

Build rafters across the roof and separate them with blocking. These should overhang the walls of your shed for increased weather protection.

Nail plywood sheeting to the rafters to form the roof. If you have added overhang, the plywood layout you used to cover the floor will have to be amended.

Cover the walls. You can use siding, textured plywood, or anything else that gives the shed a more finished look.

Add tar paper to roof. Start from lower end of roof slope and work your way upwards, making sure that each new level of paper overlaps one below it to keep rain from seeping into cracks

0:05 – Foundation of the Shed;
1:40 – Floor of the Shed;
9:40 – Walls of the Shed;
16:15 – Roof Shingles;
27:15 – Vinil siding of the Shed.

CHANNEL FOR CREATIVE #DIY_CAM – https://goo.gl/aOvsY2
This channel is created for those who love life, who love to create with their own hands for independent, purposeful and creative people. The content of the channel will consist of videos, which will show you how to do various things with their hands. And the video will touch completely different areas of activity, the main condition – “do it yourself”.

PLAYLISTS OF CHANNEL:
1. CARS AND MOTOCYCLES – https://goo.gl/R974eu
2. CONSTRUCTION AND REPAIR – https://goo.gl/KkvFu9
3. MOBILE DEVICES AND COMPUTERS – https://goo.gl/7PYuGk
4. DIY – https://goo.gl/s7KKEb

Follow us in:
FACEBOOK – https://goo.gl/1cDIqR
TWITTER – https://goo.gl/9zmdV7
VK – https://goo.gl/1N6VJ8
OK – https://goo.gl/2xWJtQ
INSTAGRAM – https://goo.gl/i972mY
GOOGLE + – https://goo.gl/BU72No
LIVEJOURNAL – https://goo.gl/S6LijG
TUMBLR – https://goo.gl/DZkiai
REDDIT – https://goo.gl/jrO4eZ
BLOGGER – https://goo.gl/eqnZC4
DIGG – https://goo.gl/sZfJ2L
PINTEREST – https://goo.gl/Mm0159
AMEBA – https://goo.gl/7w9L9t
LINKEDIN – https://www.linkedin.com/groups/6964226/

My Channel on YouTube ♦СВОИМИ РУКАМИ Handmade DIY♦ – https://goo.gl/xMFhlG
My Channel on YouTube ♦СДЕЛАЙ САМ своими руками How to DIY♦ – https://goo.gl/fAwRV5

I love to diy a lot. Many of handmade things was and are very usefull ones in ordinary lifes. How to make some things? What crafts of craft should I choose? The constuction is main side of the creativity. At this field we must be able as to make insulation or padding as waterproofing and repairs or reperation, also pluster and fix ect. You must know some about welding and installation or disassembly of the different things.
Video Rating: / 5

20 Replies to “Shed DIY. How to Build a Shed House. How to Build a Shed. How to Build a Shed Step by Step ♦DIY CAM♦”

  1. When framing people talk about matching diagonals they are not speaking about the Pythagorean theorem. You measure both of your diagonal measurements and if they match then you have either a square or a rectangle. However, if they don't match you have a rhombus or parallelogram and you need to adjust your corners to be 90 degrees. Measuring diagonals means checking for how square your framing is.

  2. Building a shed with Jeff Goldblum:) you have some similar vocal qualities and mannerisms. Hopefully you take that as a compliment. Nice video!

  3. Gluing 1/2" over 3/4" is not needed, a waste of time and $. Screws for the floor are good to prevent squeaks, construction adhesive will also prevent squeaks.

  4. Nails are cheaper and faster for your floor framing. There is no use in putting all that blocking between the floor joists, it is a waste of time. There are videos of real builders building a shed that are more useful.

  5. 4" X 4" header with center cripple would be fine for a shed windows. 4" X 6" header for door with cripples. Starter shingles need to be 3/4"-1" below drip edge. Fix the problem before you get tail rafter dry rot eventually. Something does not look right with that roof vent system. Cori-vent is what I used on my home roof crown.

  6. I've built sheds in time past but Ryan's designs are superb [ Check Details In My Channel ]. His work are second to none. I've never seen such before. The sheds are looking very nice and the building plan instructions are so detailed and very well simplified. This is cool!

  7. Great Video clip! Sorry for chiming in, I am interested in your initial thoughts. Have you heard the talk about – Mahorrla Wooden Paradise Method (search on google)? It is a great one off guide for building better sheds and woodworking without the hard work. Ive heard some unbelievable things about it and my close friend Aubrey got astronomical results with it.

  8. Looks very good. Next time screws in a joist hanger is no good. A screw does not have the shear strength that a nail does. Other than that you did a wonderful job

  9. hey ,if anyone else is searching for build your own shed cheap try Letza Amazing Shed Lessons ( search on google ) ? Ive heard some decent things about it and my m8 got amazing success with it.

  10. Nice movie I think. However you should take instructions from woodprix website if you want to learn how to make it easily.

  11. I wish you had spent a little more time on the doorway, the size and materials. Sheetrock the inside, put in a bathroom and rent it out.

Leave a Reply

Your email address will not be published. Required fields are marked *