How to Build a Shed – How to Frame Walls For a Shed – Video 5 of 15

http://countrylifeprojects.com/shedplan/ – In this video Henry teaches you how to frame the walls for the shed, or any building. He shows you how to mark and layout the walls as well as detailed instruction on:

– Right way to measure and mark top and bottom plates for studs.
– How to frame the shed corners with inside corner backing if required
– How To Identify crown edge of studs and placement for straighter walls.
– How to easily line up walls to shed floor
– How to frame a door or window header
– How to Stand up, brace and plumb the walls
– Frame a door opening
– Block walls to increase door security and reduce break & Enter

NOTE: Henry shows you how to frame a door opening with a header but no window in this video. However, if you are framing a window, simply determine the opening height required, cut and install a horizontal 2×4 and then finish the studs underneath as per the 16″ centers marked out on the bottom plate.

View 15 all of our Shed Building videos on our YouTube Channel: https://www.youtube.com/user/CountryLifeMedia/videos

Our Shed Plans for this shed are available here: http://countrylifeprojects.com/shedplan/

We have more projects coming up in the spring of 2017, Don’t miss them: Subscribe to the Country Life Projects channel here: http://www.youtube.com/subscription_center?adduser=CountryLifeMedia

Shed Design & Plans Copyright Countrylifeprojects.com – All Rights Reserved

20 Replies to “How to Build a Shed – How to Frame Walls For a Shed – Video 5 of 15”

  1. Applaud the use of screws. You’ll get an 85% stronger hold by pre-drilling the holes according to a Georgia Tech study👍🏻

  2. I worked in manufacturing as a tool and die maker, and never built a shed or outside structure in my life. The way you plan your work using jigs etc, to preclude problems ahead of time and make it all come together easily to GUARANTEE a good result is very much how I did in the shop and these are hands down the finest videos for a woodworking beginner like myself. Your presentation and instructions assume nothing in terms of the listeners expertise level or lack thereof and are clear, concise and thorough. In short, if the viewer carefully follows your instructions, it's impossible to go wrong. Thanks so much for taking the time to make these videos, I'm pumped and can't wait to start on my project!!!

  3. I am planning to build a 7×17 garden shed. How can I use the plan and change the dimensions? I would appreciate your comments. Thanks.

  4. This is by far the best shed construction series on the net, so many excellent tips, top quality and many thanks, going to build a 16×9 shed and you have helped so much, many thanks.

  5. I have been working on a 16×12 shed for my wife for almost two years now, (it's a Summer kitchen) Electricity, heat air and hot and cold water, doing it all myself and I have made many mistakes, I wish I had watched videos like this before I started the work.

  6. Fantastic Tips…..Shout out to you for showing how to do this by yourself…and I am by myself. I love to work on my sheds and I get a way better shed made better than the expensive Home depot sheds and at 1/2 the cost.

Leave a Reply

Your email address will not be published. Required fields are marked *